• 1992-2000 Toyota Soarer / Lexus SC JZZ30 (Z30) with the vehicle-specific KAP fire extinguisher bracket shown inset
  • Close-up of a red fire extinguisher held in a KAP bracket at the base of the left front seat in a Toyota Soarer / Lexus SC
  • KAP bracket holding an extinguisher at the seat foot: built to hold when it matters
  • Close-up of a red fire extinguisher held in a KAP bracket at the base of the left front seat in a Toyota Soarer / Lexus SC
  • KAP bracket secured to the factory seat mounting point
  • KAP bracket versus no bracket: fit, reach, rough roads and cargo room compared
  • Close-up of a red fire extinguisher held in a KAP bracket at the base of the left front seat in a Toyota Soarer / Lexus SC
  • The details that matter: factory seat bolt, laser-cut powder-coated steel, reachable from the driver's seat
  • One bracket for every kind of drive: track days, work sites, camping trips and the daily drive
  • KAP bracket installed at the front seat: bolts into existing factory mounting points
1 10

KAP Industries

Fire Extinguisher Bracket for 1992-2000 Toyota Soarer / Lexus SC JZZ30 (Driver Seat)

Fire Extinguisher Bracket for 1992-2000 Toyota Soarer / Lexus SC JZZ30 (Driver Seat)

4.9/5 based on 1686 Reviews

$79.95 USD
$89.95 USD $79.95 USD
On Sale
In Stock

The KAP fire extinguisher bracket for the 1992 to 2000 Toyota Soarer and Lexus SC JZZ30 mounts to the factory driver-seat bolt points with no drilling. It is laser-cut from 11 gauge steel, powder-coated black, and backed by KAP's Lifetime Warranty. Proudly made in America.

  • Fits 1992-2000 Toyota Soarer / Lexus SC JZZ30 coupe

  • Mounts to the factory seat bolt points, no drilling

  • Fits the left-hand (driver's) front seat

  • Straightforward install, standard hand tools

  • 11 gauge steel, powder-coated black

  • M5 cage hardware included

  • Lifetime Warranty

  • Proudly made in America.
  • Made in the USA
  • Free express shipping over $99
  • Model-specific fit
  • Will this fit my Lexus SC or Soarer?

    It is confirmed for the 1992 to 2000 Lexus SC300 and SC400, sold in Japan as the Toyota Soarer (JZZ30). This is the left-side, driver-seat mount. If you are unsure about your model year, contact us before ordering.

  • Where does the fire extinguisher mount in a Lexus SC?

    At the driver seat. The bracket mounts to the factory seat bolt points at the seat foot, keeping the extinguisher low, secure and within reach.

  • Do I need to drill anything?

    No. The bracket mounts to the existing factory seat bolt points. Nothing is drilled, cut or modified.

  • Which side does it fit?

    The left-hand front seat, the driver's seat in a US-market car.

  • How is it installed?

    Designed for straightforward installation using standard hand tools. Fit the cage to the bracket first, set the bracket at the seat foot, then secure the seat per the vehicle manufacturer's seat fastener procedure. Follow the vehicle manufacturer's seat fastener procedure. Check that the seat adjusts and locks normally and clears the belt and airbag components before you drive. Model-specific notes on this page override the general guide.

  • What is included?

    The bracket, plus two M5 bolts, two nylock nuts and washers to attach your extinguisher cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. The extinguisher and cage are sold separately.

  • What is it made of?

    11 gauge steel, laser-cut and powder-coated black. Proudly made in America.

  • Is it covered by a warranty?

    Yes. KAP's Lifetime Warranty covers defects in materials and workmanship for the original purchaser. Full terms on the Warranty page.

  • Will it affect my seat?

    Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.

  • What extinguisher fits?

    Sized for the 2.5 lb class of extinguisher commonly used in vehicles in the US. Exact cylinder dimensions the bracket accepts are listed under Extinguisher compatibility on the Installation page.

  • Can I use the extinguisher while driving?

    Never remove or use the extinguisher while the vehicle is moving. Stop safely and secure the vehicle first.

View all FAQs
View full details
Fitment and specification

DESIGNED FOR YOUR EXACT MAKE AND MODEL

CAD-designed for one exact make, model and year. It bolts into existing factory mounting points, so nothing is drilled, cut or modified and the install is fully reversible.

Part no.BR-0044-LH
Chassis
JZZ30 (Z30)
Body style
Coupe
US model years
1992 to 2000
Seat
Left-hand front seat (driver in a US-market vehicle)
Mounting points
Factory points used
Drilling
No drilling. Mounts to the factory seat bolt points.
Install
Standard install, standard hand tools
Hardware included
2 × M5 bolts, 2 × nylock nuts and washers
Material
11 gauge steel, laser-cut and powder-coated black
Made in
Boise, Idaho, from American steel
Built for
Classic / Collector / Restomod

Extinguisher and cage sold separately. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized and installed per its manufacturer's instructions.

About this bracket

SPECIFIC BEATS UNIVERSAL

The JZZ30 is the third-generation Toyota Soarer, sold in the US as the Lexus SC300 and SC400, a front-engine rear-drive luxury grand tourer that shares its bones with the legendary A80 Supra and became a tuner favorite for exactly that reason. A cherished GT deserves safety gear as considered as the restoration. A Lexus SC fire extinguisher bracket from KAP mounts one at the driver seat, no drilling.

Designed for the 1992 to 2000 Lexus SC coupe. Mounts to the factory seat bolt points, no drilling, no modification. This is the left-hand front seat bracket: the driver's seat on a US-market car.

A universal mount fits no car in particular, so in the SC's low cabin it sits proud of the seat rail and steals space. This one is cut for the SC's own seat foot and only that. No drilling. No guesswork. No 'that'll probably hold.'

Designed for straightforward installation using standard hand tools. Fit the cage to the bracket first, set the bracket at the seat foot, then secure the seat per the vehicle manufacturer's seat fastener procedure. Two M5 bolts, two nylock nuts and washers are included to attach the cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. Extinguisher and cage sold separately.

Cut from 11 gauge steel and finished in black powder coat, it tucks against the seat foot of the SC so the footwell stays clear. Backed by KAP's Lifetime Warranty. Proudly made in America.

Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.

Over 45,000 KAP brackets sold and 4.9 out of 5 from 1,600+ verified KAP customer reviews across the KAP range. A restored car deserves safety gear that respects the work.

Safety note. Mounts to your vehicle's seat fasteners. Follow the vehicle manufacturer's fastener procedure, check that the seat adjusts and locks normally and clears the belt and airbag components before driving, and use a metal-strapped vehicle extinguisher cage. Installation guide

All sales final for change of mind. Wrong fit? Covered by our Fitment Guarantee.

Lifetime Warranty

Included in your Fire Extinguisher Bracket for 1992-2000 Toyota Soarer / Lexus SC JZZ30 (Driver Seat) purchase:

KAP Industries Fire Extinguisher Bracket for 1992-2000 Toyota Soarer / Lexus SC JZZ30 (Driver Seat)

1x Bracket

M5 High Tensile Steel Locknuts

2x Locknuts

M5 High Tensile Steel Hex Bolts

2x Hex Bolts

M5 Flat Washers

2x Flat Washers

Sticker

1x Sticker

Limited Lifetime Warranty

On all brackets

SPECIFIC BEATS UNIVERSAL
Australian-born. American-made.

MADE IN THE USA

Proven on Australian racetracks and Outback roads. Cut, finished and shipped from Boise, Idaho. More than a decade of testing went into these brackets before the first one was sold in the US.

Every bracket is CAD-designed for one exact make, model and year, laser-cut, powder-coated, and made in Boise, Idaho, from American steel.

Originally developed to meet demanding Australian motorsport expectations, with U.S. compliance pathways in development.

45,000+

Brackets sold

4.9/5

Average rating

1,600+

Reviews

400+

Makes and models
MADE IN THE USA