KAP Industries
Fire Extinguisher Bracket for 1985-1995 Suzuki Samurai SJ70
Fire Extinguisher Bracket for 1985-1995 Suzuki Samurai SJ70
The KAP fire extinguisher bracket for the 1985 to 1995 Suzuki Samurai (SJ70 / SJ413) mounts to the factory seat bolt points with no drilling and fits either front seat. Laser-cut from 11 gauge steel, powder-coated black, and backed by KAP's Lifetime Warranty. Proudly made in America.
-
Fits 1985-1995 Suzuki Samurai SJ70
-
Mounts to the factory seat bolt points, no drilling
-
Fits either front seat, driver or passenger
-
Straightforward install, standard hand tools
-
11 gauge steel, powder-coated black
-
M5 cage hardware included
-
Lifetime Warranty
-
Proudly made in America.
Couldn't load pickup availability
- Made in the USA
- Free express shipping over $99
- Model-specific fit
-
Will this fit my Samurai?
It is confirmed for the 1985 to 1995 Suzuki Samurai (SJ70 / SJ413), sold as the Sierra in other markets. Not sure about your model year or seat option? Contact us before you order.
-
Where does the fire extinguisher mount in a Suzuki Samurai?
At the front seat. The bracket mounts to the factory seat bolt points at the seat foot, so the extinguisher stays low, fixed and within reach in a very small cabin.
-
Do I need to drill anything?
No. The bracket mounts to the existing factory seat bolt points. Nothing is drilled, cut or modified.
-
Which side does it fit?
Either front seat, driver or passenger. Order two if you want one on each side.
-
How is it installed?
Designed for straightforward installation using standard hand tools. Fit the cage to the bracket first, then sit the bracket at the seat foot. Follow the vehicle manufacturer's seat fastener procedure. Check that the seat adjusts and locks normally and clears the belt and airbag components before you drive. Model-specific notes on this page override the general guide.
-
What is included?
The bracket, plus two M5 bolts, two nylock nuts and washers to attach your extinguisher cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. The extinguisher and cage are sold separately.
-
What is it made of?
11 gauge steel, laser-cut and powder-coated black. Proudly made in America.
-
Is it covered by a warranty?
Yes. KAP's Lifetime Warranty covers defects in materials and workmanship for the original purchaser. Full terms on the Warranty page.
-
Will it affect my seat?
Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.
-
What extinguisher fits?
Sized for the 2.5 lb class of extinguisher commonly used in vehicles in the US. Exact cylinder dimensions the bracket accepts are listed under Extinguisher compatibility on the Installation page.
-
Can I use the extinguisher while driving?
Never remove or use the extinguisher while the vehicle is moving. Stop safely and secure the vehicle first.

DESIGNED FOR YOUR EXACT MAKE AND MODEL
CAD-designed for one exact make, model and year. It bolts into existing factory mounting points, so nothing is drilled, cut or modified and the install is fully reversible.
- Chassis
- SJ70
- Body style
- SUV
- US model years
- 1985 to 1995
- Seat
- Either front seat, driver or passenger
- Mounting points
- Factory points used
- Drilling
- No drilling. Mounts to the factory seat bolt points.
- Install
- Standard install, standard hand tools
- Hardware included
- 2 × M5 bolts, 2 × nylock nuts and washers
- Material
- 11 gauge steel, laser-cut and powder-coated black
- Made in
- Boise, Idaho, from American steel
- Built for
- 4WD / Overlanding
Extinguisher and cage sold separately. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized and installed per its manufacturer's instructions.
SPECIFIC BEATS UNIVERSAL
The Samurai is the little 4x4 that outsold the Wrangler in its first year in America and then spent three decades earning a cult following on trails that swallow bigger trucks. Light, narrow and simple, it goes places on sheer nimbleness. It also has almost nowhere to put anything, which is how extinguishers end up loose in the footwell of a vehicle that spends its weekends at odd angles. A Suzuki Samurai fire extinguisher bracket from KAP fixes that at the front seat.
Designed specifically for the 1985 to 1995 Suzuki Samurai, the SJ70 sold in other markets as the Sierra, on the SJ413 body. It attaches at the factory seat bolt points, so nothing in a forty-year-old cabin is drilled, cut or altered. One bracket fits either front seat, driver or passenger. Want one on each side? Order two.
A universal bracket sized for a modern SUV floor has no business in a Samurai, where every inch of the floorpan is spoken for. This bracket is cut to the Samurai seat foot and takes up exactly the space it needs. Rough roads are excellent at exposing bad ideas.
Designed for straightforward installation using standard hand tools. Fit the cage to the bracket first, sit the bracket at the seat foot, and secure the seat per the vehicle manufacturer's seat fastener procedure. Two M5 bolts, two nylock nuts and washers are included to attach the cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. Extinguisher and cage sold separately.
Laser-cut from 11 gauge steel and powder-coated black, it is as honest a piece of hardware as the Samurai itself. Backed by KAP's Lifetime Warranty. Proudly made in America.
Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.
Over 45,000 KAP brackets sold and 4.9 out of 5 from 1,600+ verified KAP customer reviews across the KAP range. The trail will find the weak point. Best not make it your safety gear.
Safety note. Mounts to your vehicle's seat fasteners. Follow the vehicle manufacturer's fastener procedure, check that the seat adjusts and locks normally and clears the belt and airbag components before driving, and use a metal-strapped vehicle extinguisher cage. Installation guide
All sales final for change of mind. Wrong fit? Covered by our Fitment Guarantee.
Included in your Fire Extinguisher Bracket for 1985-1995 Suzuki Samurai SJ70 purchase:
KAP Industries Fire Extinguisher Bracket for 1985-1995 Suzuki Samurai SJ70
1x Bracket
M5 High Tensile Steel Locknuts
2x Locknuts
M5 High Tensile Steel Hex Bolts
2x Hex Bolts
M5 Flat Washers
2x Flat Washers
Sticker
1x Sticker
Limited Lifetime Warranty
On all brackets
MADE IN THE USA
Proven on Australian racetracks and Outback roads. Cut, finished and shipped from Boise, Idaho. More than a decade of testing went into these brackets before the first one was sold in the US.
Every bracket is CAD-designed for one exact make, model and year, laser-cut, powder-coated, and made in Boise, Idaho, from American steel.
Originally developed to meet demanding Australian motorsport expectations, with U.S. compliance pathways in development.
45,000+
Brackets sold4.9/5
Average rating1,600+
Reviews400+
Makes and models