• 2016-2024 Nissan Armada Y62 with the vehicle-specific KAP fire extinguisher bracket shown inset
  • Close-up of a red fire extinguisher held in a KAP bracket at the base of the left front seat in a Nissan Armada
  • KAP bracket holding an extinguisher at the seat foot: built to hold when it matters
  • Close-up of a red fire extinguisher held in a KAP bracket at the base of the left front seat in a Nissan Armada
  • KAP bracket secured to the factory seat mounting point
  • KAP bracket versus no bracket: fit, reach, rough roads and cargo room compared
  • Close-up of a red fire extinguisher held in a KAP bracket at the base of the right front seat in a Nissan Armada
  • Close-up of a red fire extinguisher held in a KAP bracket at the base of the right front seat in a Nissan Armada
  • The details that matter: factory seat bolt, laser-cut powder-coated steel, reachable from the driver's seat
  • One bracket for every kind of drive: track days, work sites, camping trips and the daily drive
  • KAP bracket installed at the front seat: bolts into existing factory mounting points
1 11

KAP Industries

Fire Extinguisher Bracket for 2016-2024 Nissan Armada Y62

Fire Extinguisher Bracket for 2016-2024 Nissan Armada Y62

4.9/5 based on 1686 Reviews

$79.95 USD
$89.95 USD $79.95 USD
On Sale
In Stock

The KAP fire extinguisher bracket for the 2016 to 2024 Nissan Armada Y62 mounts to the factory seat bolt points with no drilling and fits the left (driver) or right (passenger) front seat. It is laser-cut from 11 gauge steel, powder-coated black, and backed by KAP's Lifetime Warranty. Proudly made in America.

  • Fits 2016 to 2024 Nissan Armada Y62 SUV

  • Mounts to the factory seat bolt points, no drilling

  • Left side (driver) or right side (passenger) front seat

  • Straightforward install, standard hand tools

  • 11 gauge steel, powder-coated black

  • M5 cage hardware included

  • Lifetime Warranty

  • Proudly made in America.

Bracket Location
  • Made in the USA
  • Free express shipping over $99
  • Model-specific fit
  • Will this fit my Y62 Armada?

    It is confirmed for the 2016 to 2024 Nissan Armada Y62. If you are unsure about your model year, market or seat option, contact us before ordering.

  • Where does the fire extinguisher mount in an Armada?

    At the front seat. The bracket mounts to the factory seat bolt points at the seat foot, keeping the extinguisher low, secure and within reach.

  • Do I need to drill anything?

    No. The bracket mounts to the existing factory seat bolt points. Nothing is drilled, cut or modified.

  • Which side does it fit?

    Either one. Choose Left side (Driver) or Right side (Passenger) under Bracket Location. Each side is its own bracket, so order one of each to fit both front seats.

  • How is it installed?

    Designed for straightforward installation using standard hand tools. Fit the cage to the bracket first, set the bracket at the seat foot, then secure the seat per the vehicle manufacturer's seat fastener procedure. Follow the vehicle manufacturer's seat fastener procedure. Check that the seat adjusts and locks normally and clears the belt and airbag components before you drive. Model-specific notes on this page override the general guide.

  • What is included?

    The bracket, plus two M5 bolts, two nylock nuts and washers to attach your extinguisher cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. The extinguisher and cage are sold separately.

  • What is it made of?

    11 gauge steel, laser-cut and powder-coated black. Proudly made in America.

  • Is it covered by a warranty?

    Yes. KAP's Lifetime Warranty covers defects in materials and workmanship for the original purchaser. Full terms on the Warranty page.

  • Will it affect my seat?

    Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.

  • What extinguisher fits?

    Sized for the 2.5 lb class of extinguisher commonly used in vehicles in the US. Exact cylinder dimensions the bracket accepts are listed under Extinguisher compatibility on the Installation page.

  • Can I use the extinguisher while driving?

    Never remove or use the extinguisher while the vehicle is moving. Stop safely and secure the vehicle first.

View all FAQs
View full details
Fitment and specification

DESIGNED FOR YOUR EXACT MAKE AND MODEL

CAD-designed for one exact make, model and year. It bolts into existing factory mounting points, so nothing is drilled, cut or modified and the install is fully reversible.

Part no.BR-0053-LH
Chassis
Y62
Body style
SUV
US model years
2016 to 2024
Seat
Left side (driver) or right side (passenger) front seat, chosen under Bracket Location
Mounting points
Factory points used
Drilling
No drilling. Mounts to the factory seat bolt points.
Install
Standard install, standard hand tools
Hardware included
2 × M5 bolts, 2 × nylock nuts and washers
Material
11 gauge steel, laser-cut and powder-coated black
Made in
Boise, Idaho, from American steel
Built for
4WD / Overlanding

Extinguisher and cage sold separately. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized and installed per its manufacturer's instructions.

About this bracket

SPECIFIC BEATS UNIVERSAL

The Y62 Armada, sold overseas as the Armada, is a desert and Outback legend, a big naturally aspirated V8 wagon that the Middle East and Australia build into serious touring rigs while the rest of the industry downsizes. A truck driven that far off the map carries fuel, recovery gear and heat, and a loose extinguisher rolling around the back is no help when it matters. A Y62 Nissan Armada fire extinguisher bracket from KAP fixes one at the front seat, within reach.

Designed specifically for the 2016 to 2024 Nissan Armada Y62 SUV. It mounts to the factory seat bolt points, so nothing is drilled, cut or modified. Choose Left side (Driver) or Right side (Passenger) under Bracket Location. Each side is its own bracket, so order one of each to fit both front seats.

A universal mount is built to sort of fit any large SUV, which in an Armada means a bracket standing off the seat rail or an extinguisher pushed out of reach. This one is cut for the Y62's own seat foot and nothing else. No drilling. No guesswork. No 'that'll probably hold.'

Designed for straightforward installation using standard hand tools. Fit the cage to the bracket first, set the bracket at the seat foot, then secure the seat per the vehicle manufacturer's seat fastener procedure. Two M5 bolts, two nylock nuts and washers are included to attach the cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. Extinguisher and cage sold separately.

Laser-cut from 11 gauge steel and powder-coated black, it sits low at the front seat of the Armada and stays out of the way in a cabin built for long distances. Backed by KAP's Lifetime Warranty. Proudly made in America.

Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.

Over 45,000 KAP brackets sold and 4.9 out of 5 from 1,600+ verified KAP customer reviews across the KAP range. Rough roads are excellent at exposing bad ideas.

Safety note. Mounts to your vehicle's seat fasteners. Follow the vehicle manufacturer's fastener procedure, check that the seat adjusts and locks normally and clears the belt and airbag components before driving, and use a metal-strapped vehicle extinguisher cage. Installation guide

All sales final for change of mind. Wrong fit? Covered by our Fitment Guarantee.

Lifetime Warranty

Included in your Fire Extinguisher Bracket for 2016-2024 Nissan Armada Y62 purchase:

KAP Industries Fire Extinguisher Bracket for 2016-2024 Nissan Armada Y62

1x Bracket

M5 High Tensile Steel Locknuts

2x Locknuts

M5 High Tensile Steel Hex Bolts

2x Hex Bolts

M5 Flat Washers

2x Flat Washers

Sticker

1x Sticker

Limited Lifetime Warranty

On all brackets

SPECIFIC BEATS UNIVERSAL
Australian-born. American-made.

MADE IN THE USA

Proven on Australian racetracks and Outback roads. Cut, finished and shipped from Boise, Idaho. More than a decade of testing went into these brackets before the first one was sold in the US.

Every bracket is CAD-designed for one exact make, model and year, laser-cut, powder-coated, and made in Boise, Idaho, from American steel.

Originally developed to meet demanding Australian motorsport expectations, with U.S. compliance pathways in development.

45,000+

Brackets sold

4.9/5

Average rating

1,600+

Reviews

400+

Makes and models
MADE IN THE USA