• Mitsubishi Lancer Evolution IV CN9A with the vehicle-specific KAP fire extinguisher bracket shown inset
  • Mitsubishi Lancer Evolution VI cabin with a red fire extinguisher mounted on a KAP bracket at the base of the left front seat
  • KAP bracket holding an extinguisher at the seat foot: built to hold when it matters
  • Close-up of a extinguisher held in a KAP bracket at the base of the left front seat in a Mitsubishi Lancer Evolution VI
  • KAP bracket secured to the factory seat mounting point
  • KAP bracket versus no bracket: fit, reach, rough roads and cargo room compared
  • Mitsubishi Lancer Evolution VI cabin with a red fire extinguisher mounted on a KAP bracket at the base of the left front seat
  • The details that matter: factory seat bolt, laser-cut powder-coated steel, reachable from the driver's seat
  • One bracket for every kind of drive: track days, work sites, camping trips and the daily drive
  • KAP bracket installed at the front seat: bolts into existing factory mounting points
1 10

KAP Industries

Fire Extinguisher Bracket for Mitsubishi Lancer Evolution IV CN9A (Driver Seat)

Fire Extinguisher Bracket for Mitsubishi Lancer Evolution IV CN9A (Driver Seat)

4.9/5 based on 1686 Reviews

$79.95 USD
$89.95 USD $79.95 USD
On Sale
In Stock

The KAP fire extinguisher bracket for the Mitsubishi Lancer Evolution IV CN9A mounts to the factory left-side seat bolt points with no drilling. It is laser-cut from 11 gauge steel, powder-coated black, and backed by KAP's Lifetime Warranty. Proudly made in America.

  • Fits Mitsubishi Lancer Evolution IV CN9A

  • Mounts to the factory seat bolt points, no drilling

  • Fits the left-hand front seat

  • Straightforward install, standard hand tools

  • 11 gauge steel, powder-coated black

  • M5 cage hardware included

  • Lifetime Warranty

  • Proudly made in America.
  • Made in the USA
  • Free express shipping over $99
  • Model-specific fit
  • Will this fit my Evolution IV?

    It is confirmed for the Mitsubishi Lancer Evolution IV (CN9A). This is the left-side mount. If you are unsure about your car, contact us before ordering.

  • Where does the fire extinguisher mount in a Lancer Evolution?

    At the front seat, on the left side. The bracket mounts to the factory seat bolt points at the seat foot, keeping the extinguisher low, secure and within reach.

  • Do I need to drill anything?

    No. The bracket mounts to the existing factory seat bolt points. Nothing is drilled, cut or modified.

  • Which side does it fit?

    The left-hand front seat.

  • How is it installed?

    Designed for straightforward installation using standard hand tools. Attach the cage to the bracket, position the bracket at the seat foot, and secure the seat per the vehicle manufacturer's seat fastener procedure. Follow the vehicle manufacturer's seat fastener procedure. Check that the seat adjusts and locks normally and clears the belt and airbag components before you drive. Model-specific notes on this page override the general guide.

  • What is included?

    The bracket, plus two M5 bolts, two nylock nuts and washers to attach your extinguisher cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. The extinguisher and cage are sold separately.

  • What is it made of?

    11 gauge steel, laser-cut and powder-coated black. Proudly made in America.

  • Is it covered by a warranty?

    Yes. KAP's Lifetime Warranty covers defects in materials and workmanship for the original purchaser. Full terms on the Warranty page.

  • Will it affect my seat?

    Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.

  • What extinguisher fits?

    Sized for the 2.5 lb class of extinguisher commonly used in vehicles in the US. Exact cylinder dimensions the bracket accepts are listed under Extinguisher compatibility on the Installation page.

  • Can I use the extinguisher while driving?

    Never remove or use the extinguisher while the vehicle is moving. Stop safely and secure the vehicle first.

View all FAQs
View full details
Fitment and specification

DESIGNED FOR YOUR EXACT MAKE AND MODEL

CAD-designed for one exact make, model and year. It bolts into existing factory mounting points, so nothing is drilled, cut or modified and the install is fully reversible.

Part no.BR-0087-LH
Chassis
Evolution IV CN9A
Body style
Sedan
US model years
1996 to 1998
Seat
Left-hand front seat (driver in a US-market vehicle)
Mounting points
Factory points used
Drilling
No drilling. Mounts to the factory seat bolt points.
Install
Standard install, standard hand tools
Hardware included
2 × M5 bolts, 2 × nylock nuts and washers
Material
11 gauge steel, laser-cut and powder-coated black
Made in
Boise, Idaho, from American steel
Built for
Performance / Motorsport

Extinguisher and cage sold separately. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized and installed per its manufacturer's instructions.

About this bracket

SPECIFIC BEATS UNIVERSAL

The Evolution IV is a rally-bred icon, the CN9A that put Mitsubishi's turbocharged 4G63 and all-wheel drive at the front of the World Rally Championship in Tommi Makinen's hands. A car with this much motorsport in its blood deserves a fire plan, fixed in the cabin and within reach. A Mitsubishi Lancer Evolution fire extinguisher bracket from KAP mounts one at the front seat, no drilling.

Designed specifically for the Mitsubishi Lancer Evolution IV. It mounts to the factory seat bolt points, so nothing is drilled, cut or modified. It fits the left-hand front seat.

A universal mount is measured against no car, so in the Evo's compact cabin it sits proud of the seat rail and steals space. This one is cut for the Evo's own seat foot and only that. No drilling. No guesswork. No 'that'll probably hold.'

Designed for straightforward installation using standard hand tools. Attach the cage to the bracket, position the bracket at the seat foot, and secure the seat per the vehicle manufacturer's seat fastener procedure. Two M5 bolts, two nylock nuts and washers are included to attach the cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. Extinguisher and cage sold separately.

Laser-cut from 11 gauge steel and powder-coated black, it sits low at the seat foot of the Evo, clear of the pedals. Backed by KAP's Lifetime Warranty. Proudly made in America.

Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.

Over 45,000 KAP brackets sold and 4.9 out of 5 from 1,600+ verified KAP customer reviews across the KAP range. The apex is optional. A secure extinguisher is not.

Safety note. Mounts to your vehicle's seat fasteners. Follow the vehicle manufacturer's fastener procedure, check that the seat adjusts and locks normally and clears the belt and airbag components before driving, and use a metal-strapped vehicle extinguisher cage. Installation guide

All sales final for change of mind. Wrong fit? Covered by our Fitment Guarantee.

Lifetime Warranty

Included in your Fire Extinguisher Bracket for Mitsubishi Lancer Evolution IV CN9A (Driver Seat) purchase:

KAP Industries Fire Extinguisher Bracket for Mitsubishi Lancer Evolution IV CN9A (Driver Seat)

1x Bracket

M5 High Tensile Steel Locknuts

2x Locknuts

M5 High Tensile Steel Hex Bolts

2x Hex Bolts

M5 Flat Washers

2x Flat Washers

Sticker

1x Sticker

Limited Lifetime Warranty

On all brackets

SPECIFIC BEATS UNIVERSAL
Australian-born. American-made.

MADE IN THE USA

Proven on Australian racetracks and Outback roads. Cut, finished and shipped from Boise, Idaho. More than a decade of testing went into these brackets before the first one was sold in the US.

Every bracket is CAD-designed for one exact make, model and year, laser-cut, powder-coated, and made in Boise, Idaho, from American steel.

Originally developed to meet demanding Australian motorsport expectations, with U.S. compliance pathways in development.

45,000+

Brackets sold

4.9/5

Average rating

1,600+

Reviews

400+

Makes and models
MADE IN THE USA