• 2003-2005 Mitsubishi Evo VIII CT9A with the vehicle-specific KAP fire extinguisher bracket shown inset
  • Mitsubishi Evo VIII cabin with a red fire extinguisher mounted on a KAP bracket at the base of the left front seat
  • KAP bracket holding an extinguisher at the seat foot: built to hold when it matters
  • Close-up of a red fire extinguisher held in a KAP bracket at the base of the left front seat in a Mitsubishi Evo VIII
  • KAP bracket secured to the factory seat mounting point
  • KAP bracket versus no bracket: fit, reach, rough roads and cargo room compared
  • Close-up of a red fire extinguisher held in a KAP bracket at the base of the left front seat in a Mitsubishi Evo VIII
  • The details that matter: factory seat bolt, laser-cut powder-coated steel, reachable from the driver's seat
  • One bracket for every kind of drive: track days, work sites, camping trips and the daily drive
  • KAP bracket installed at the front seat: bolts into existing factory mounting points
1 10

KAP Industries

Fire Extinguisher Bracket for 2003-2005 Mitsubishi Evo VIII CT9A (Driver Seat)

Fire Extinguisher Bracket for 2003-2005 Mitsubishi Evo VIII CT9A (Driver Seat)

4.9/5 based on 1686 Reviews

$79.95 USD
$89.95 USD $79.95 USD
On Sale
In Stock

The KAP fire extinguisher bracket for the 2003 to 2005 Mitsubishi Lancer Evolution VIII (CT9A) sedan mounts to the factory seat bolt points at the left-hand front seat, the driver's seat in the US, with no drilling. Laser-cut from 11 gauge steel, powder-coated black, and backed by KAP's Lifetime Warranty. Proudly made in America.

  • Fits 2003-2005 Mitsubishi Lancer Evolution VIII CT9A sedan

  • Mounts to the factory seat bolt points, no drilling

  • Fits the left-hand front seat, the driver's seat in the US

  • Straightforward install, standard hand tools

  • 11 gauge steel, powder-coated black

  • M5 cage hardware included

  • Lifetime Warranty

  • Proudly made in America.
  • Made in the USA
  • Free express shipping over $99
  • Model-specific fit
  • Will this fit my Evo VIII?

    It is confirmed for the 2003 to 2005 Mitsubishi Lancer Evolution VIII sedan (CT9A). Not sure about your model year or seat option? Contact us before you order.

  • Where does the fire extinguisher mount in a Lancer Evolution VIII?

    At the driver's seat. The bracket mounts to the factory seat bolt points at the seat foot, keeping the extinguisher low, fixed and within the driver's reach.

  • Do I need to drill anything?

    No. The bracket mounts to the existing factory seat bolt points. Nothing is drilled, cut or modified.

  • Which side does it fit?

    The left-hand front seat, which is the driver's seat in a US-market Evo VIII.

  • How is it installed?

    Designed for straightforward installation using standard hand tools. Attach the cage to the bracket first, then position the bracket at the driver's seat foot. Follow the vehicle manufacturer's seat fastener procedure. Check that the seat adjusts and locks normally and clears the belt and airbag components before you drive. Model-specific notes on this page override the general guide.

  • What is included?

    The bracket, plus two M5 bolts, two nylock nuts and washers to attach your extinguisher cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. The extinguisher and cage are sold separately.

  • What is it made of?

    11 gauge steel, laser-cut and powder-coated black. Proudly made in America.

  • Is it covered by a warranty?

    Yes. KAP's Lifetime Warranty covers defects in materials and workmanship for the original purchaser. Full terms on the Warranty page.

  • Will it affect my seat?

    Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.

  • What extinguisher fits?

    Sized for the 2.5 lb class of extinguisher commonly used in vehicles in the US. Exact cylinder dimensions the bracket accepts are listed under Extinguisher compatibility on the Installation page.

  • Can I use the extinguisher while driving?

    Never remove or use the extinguisher while the vehicle is moving. Stop safely and secure the vehicle first.

View all FAQs
View full details
Fitment and specification

DESIGNED FOR YOUR EXACT MAKE AND MODEL

CAD-designed for one exact make, model and year. It bolts into existing factory mounting points, so nothing is drilled, cut or modified and the install is fully reversible.

Part no.BR-0088-LH
Chassis
Evolution VIII
Body style
Sedan
US model years
2003 to 2005
Seat
Left-hand front seat (driver in a US-market vehicle)
Mounting points
Factory points used
Drilling
No drilling. Mounts to the factory seat bolt points.
Install
Standard install, standard hand tools
Hardware included
2 × M5 bolts, 2 × nylock nuts and washers
Material
11 gauge steel, laser-cut and powder-coated black
Made in
Boise, Idaho, from American steel
Built for
Performance / Motorsport

Extinguisher and cage sold separately. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized and installed per its manufacturer's instructions.

About this bracket

SPECIFIC BEATS UNIVERSAL

The Lancer Evolution VIII is the Evo that finally came to America. After a decade of gray imports and Gran Turismo daydreams, Mitsubishi put the CT9A on US dealer lots in 2003 and enthusiasts bought them faster than anyone planned. Twenty years on they are still doing HPDE weekends, autocross, rally-cross and the occasional very fast back road. That is a driving life that calls for a fixed extinguisher. An Evo VIII fire extinguisher bracket from KAP mounts one at the driver's seat, where a hand can find it.

Designed specifically for the 2003 to 2005 Mitsubishi Lancer Evolution VIII sedan on the CT9A platform. The bracket mounts to the factory seat bolt points, so the floor is never drilled and the car is never modified. Fits the left-hand front seat, the driver's seat in a US-market car.

Evo cabins have already given up space to a roll bar, a harness bar or a race seat in plenty of cases, and a universal bracket makes a poor neighbor. This bracket is cut to the CT9A seat foot and does not get in the way. No drilling. No guesswork. No 'that'll probably hold.'

Designed for straightforward installation using standard hand tools. Attach the cage to the bracket first, position the bracket at the driver's seat foot, then secure the seat per the vehicle manufacturer's seat fastener procedure. Two M5 bolts, two nylock nuts and washers are included to attach the cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. Extinguisher and cage sold separately.

Laser-cut from 11 gauge steel and powder-coated black, so it sits quietly at the driver's seat of a car that is anything but quiet. Backed by KAP's Lifetime Warranty. Proudly made in America.

Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.

Over 45,000 KAP brackets sold and 4.9 out of 5 from 1,600+ verified KAP customer reviews across the KAP range. The apex is optional. A secure extinguisher is not.

Safety note. Mounts to your vehicle's seat fasteners. Follow the vehicle manufacturer's fastener procedure, check that the seat adjusts and locks normally and clears the belt and airbag components before driving, and use a metal-strapped vehicle extinguisher cage. Installation guide

All sales final for change of mind. Wrong fit? Covered by our Fitment Guarantee.

Lifetime Warranty

Included in your Fire Extinguisher Bracket for 2003-2005 Mitsubishi Evo VIII CT9A (Driver Seat) purchase:

KAP Industries Fire Extinguisher Bracket for 2003-2005 Mitsubishi Evo VIII CT9A (Driver Seat)

1x Bracket

M5 High Tensile Steel Locknuts

2x Locknuts

M5 High Tensile Steel Hex Bolts

2x Hex Bolts

M5 Flat Washers

2x Flat Washers

Sticker

1x Sticker

Limited Lifetime Warranty

On all brackets

SPECIFIC BEATS UNIVERSAL
Australian-born. American-made.

MADE IN THE USA

Proven on Australian racetracks and Outback roads. Cut, finished and shipped from Boise, Idaho. More than a decade of testing went into these brackets before the first one was sold in the US.

Every bracket is CAD-designed for one exact make, model and year, laser-cut, powder-coated, and made in Boise, Idaho, from American steel.

Originally developed to meet demanding Australian motorsport expectations, with U.S. compliance pathways in development.

45,000+

Brackets sold

4.9/5

Average rating

1,600+

Reviews

400+

Makes and models
MADE IN THE USA