• 2019+ Chevrolet Silverado 1500 4th Gen with the vehicle-specific KAP fire extinguisher bracket shown inset
  • Close-up of a red fire extinguisher held in a KAP bracket at the base of the front seat in a GMC Sierra 1500
  • KAP bracket holding an extinguisher at the seat foot: built to hold when it matters
  • Close-up of a red fire extinguisher held in a KAP bracket at the base of the front seat in a GMC Sierra 1500
  • KAP bracket secured to the factory seat mounting point
  • KAP bracket versus no bracket: fit, reach, rough roads and cargo room compared
  • GMC Sierra 1500 cabin with a red fire extinguisher mounted on a KAP bracket at the base of the front seat
  • The details that matter: factory seat bolt, laser-cut powder-coated steel, reachable from the driver's seat
  • One bracket for every kind of drive: track days, work sites, camping trips and the daily drive
  • KAP bracket installed at the front seat: bolts into existing factory mounting points
1 10

KAP Industries

Fire Extinguisher Bracket for 2019+ Chevrolet Silverado 1500 4th Gen

Fire Extinguisher Bracket for 2019+ Chevrolet Silverado 1500 4th Gen

4.9/5 based on 1686 Reviews

$79.95 USD
$89.95 USD $79.95 USD
On Sale
In Stock

The KAP fire extinguisher bracket for the 2019 and newer Chevrolet Silverado 1500 pickup mounts to the factory seat bolt points inside the cab with no drilling and fits either front seat. It is laser-cut from 11 gauge steel, powder-coated black, and backed by KAP's Lifetime Warranty. Proudly made in America.

  • Fits 2019 and newer Chevrolet Silverado 1500 (4th Gen) pickup

  • Mounts to the factory seat bolt points, no drilling

  • Fits either front seat, driver or passenger

  • Straightforward install, standard hand tools

  • 11 gauge steel, powder-coated black

  • M5 cage hardware included

  • Lifetime Warranty

  • Proudly made in America.
  • Made in the USA
  • Free express shipping over $99
  • Model-specific fit
  • Will this fit my Silverado?

    It is confirmed for the 2019 and newer Chevrolet Silverado 1500 (fourth generation) pickup. If you are unsure about your model year, cab or seat option, contact us before ordering.

  • Where does the fire extinguisher mount in a Silverado 1500?

    Inside the cab at the front seat. The bracket mounts to the factory seat bolt points at the seat foot, so the extinguisher is within reach of the driver rather than out in the bed.

  • Do I need to drill anything?

    No. The bracket mounts to the existing factory seat bolt points. Nothing is drilled, cut or modified.

  • Which side does it fit?

    Either front seat, driver or passenger. Order two if you want one on each side.

  • How is it installed?

    Designed for straightforward installation using standard hand tools. The cage goes onto the bracket first; the bracket then sits at the seat foot and the seat is secured per the vehicle manufacturer's seat fastener procedure. Follow the vehicle manufacturer's seat fastener procedure. Check that the seat adjusts and locks normally and clears the belt and airbag components before you drive. Model-specific notes on this page override the general guide.

  • What is included?

    The bracket, plus two M5 bolts, two nylock nuts and washers to attach your extinguisher cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. The extinguisher and cage are sold separately.

  • What is it made of?

    11 gauge steel, laser-cut and powder-coated black. Proudly made in America.

  • Is it covered by a warranty?

    Yes. KAP's Lifetime Warranty covers defects in materials and workmanship for the original purchaser. Full terms on the Warranty page.

  • Will it affect my seat?

    Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.

  • What extinguisher fits?

    Sized for the 2.5 lb class of extinguisher commonly used in vehicles in the US. Exact cylinder dimensions the bracket accepts are listed under Extinguisher compatibility on the Installation page.

  • Can I use the extinguisher while driving?

    Never remove or use the extinguisher while the vehicle is moving. Stop safely and secure the vehicle first.

View all FAQs
View full details
Fitment and specification

DESIGNED FOR YOUR EXACT MAKE AND MODEL

CAD-designed for one exact make, model and year. It bolts into existing factory mounting points, so nothing is drilled, cut or modified and the install is fully reversible.

Part no.BR-0003-NS
Chassis
1500 4th Gen
Body style
Ute/Pickup
US model years
2019 onwards
Seat
Either front seat, driver or passenger
Mounting points
Factory points used
Drilling
No drilling. Mounts to the factory seat bolt points.
Install
Standard install, standard hand tools
Hardware included
2 × M5 bolts, 2 × nylock nuts and washers
Material
11 gauge steel, laser-cut and powder-coated black
Made in
Boise, Idaho, from American steel
Built for
Fleet / Commercial

Extinguisher and cage sold separately. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized and installed per its manufacturer's instructions.

About this bracket

SPECIFIC BEATS UNIVERSAL

The fourth-generation Silverado 1500 is the truck that shows up: on job sites, behind trailers, at the trailhead with a Trail Boss or ZR2 badge and a bed full of recovery gear. It is one of the best-selling vehicles in America for a reason. Trucks that work hard carry fuel, tools and heat, and a fire extinguisher that lives loose behind the seat is not much use in a hurry. A Silverado 1500 fire extinguisher bracket from KAP fixes it where the driver can reach it.

Designed specifically for the 2019 and newer Chevrolet Silverado 1500 fourth-generation pickup. It mounts to the factory seat bolt points, so nothing is drilled, cut or modified. The same bracket fits the driver or the passenger seat. Two seats, two brackets.

A universal bracket in a full-size pickup usually ends up strapped to a bed wall or wedged under a seat where it rattles on every washboard road. KAP drew this one for the Silverado's front seat foot, so the extinguisher rides inside the cab, low and secure. Built for duty, not decoration.

Designed for straightforward installation using standard hand tools. The cage goes onto the bracket first; the bracket then sits at the seat foot and the seat is secured per the vehicle manufacturer's seat fastener procedure. Two M5 bolts, two nylock nuts and washers are included to attach the cage. Use a metal-strapped, cage-style vehicle extinguisher mount that is correctly sized, in good condition and installed per its manufacturer's instructions. Extinguisher and cage sold separately.

Laser-cut from 11 gauge steel and powder-coated black, it takes the abuse a work truck's floor gets and stays put. Backed by KAP's Lifetime Warranty. Proudly made in America.

Depending on the extinguisher fitted, the seat may not travel as far in one direction as it did before. It must still adjust and lock normally. If it does not, stop and contact us.

Over 45,000 KAP brackets sold and 4.9 out of 5 from 1,600+ verified KAP customer reviews across the KAP range. Secure fire-extinguisher mounting for vehicles that work for a living.

Safety note. Mounts to your vehicle's seat fasteners. Follow the vehicle manufacturer's fastener procedure, check that the seat adjusts and locks normally and clears the belt and airbag components before driving, and use a metal-strapped vehicle extinguisher cage. Installation guide

All sales final for change of mind. Wrong fit? Covered by our Fitment Guarantee.

Lifetime Warranty

Included in your Fire Extinguisher Bracket for 2019+ Chevrolet Silverado 1500 4th Gen purchase:

KAP Industries Fire Extinguisher Bracket for 2019+ Chevrolet Silverado 1500 4th Gen

1x Bracket

M5 High Tensile Steel Locknuts

2x Locknuts

M5 High Tensile Steel Hex Bolts

2x Hex Bolts

M5 Flat Washers

2x Flat Washers

Sticker

1x Sticker

Limited Lifetime Warranty

On all brackets

SPECIFIC BEATS UNIVERSAL
Australian-born. American-made.

MADE IN THE USA

Proven on Australian racetracks and Outback roads. Cut, finished and shipped from Boise, Idaho. More than a decade of testing went into these brackets before the first one was sold in the US.

Every bracket is CAD-designed for one exact make, model and year, laser-cut, powder-coated, and made in Boise, Idaho, from American steel.

Originally developed to meet demanding Australian motorsport expectations, with U.S. compliance pathways in development.

45,000+

Brackets sold

4.9/5

Average rating

1,600+

Reviews

400+

Makes and models
MADE IN THE USA